Standing seam and metal panel roofing, roof repair and full replacement in Bealeton. We show up when we say we will, and we clean up before we go.
Everything we do on a roof, done by crews who have been doing it the same careful way since 2002.
Reflective coatings keep a metal roof cooler in summer and seal up the small stuff before it turns into a leak.
This is the work our name is attached to. Two decades of tin roofs on houses, churches, barns and additions, installed by crews who cut the trim on site instead of forcing something that almost fits.
Wind and debris damage is not always obvious from the ground. We check the edges, the ridge, the valleys and the fasteners before telling you anything is fine.
Hard wind lifts shingles and works panel fasteners loose along the edges, which is exactly where the next storm gets underneath. We refasten, replace and reseal.
One leak usually has company. We fix the one you called about and check over the rest of the roof while we are already up there.
When a roof is genuinely finished we replace it, and we say so plainly rather than dressing it up. Metal and shingle priced side by side so you can compare real numbers.
Temporary cover goes on fast, then we come back and make the permanent repair once we can see properly what we are working with.
Repair or replace, we handle both, and we work from what the roof actually needs rather than from what an adjuster might approve.
Most roofs somebody has called a lost cause are not one. We repair what can be repaired, and we tell you honestly when a repair will no longer hold.
Underlayment, ice and water shield in the valleys and along the eaves, sealed penetrations, and proper closures at the ridge.
A twenty year old panel roof usually needs fasteners and sealant, not replacement. We refasten with new washers and get you another long stretch out of it.
Guards installed as part of a roof job or on their own. Either way we check the hangers and the pitch while we are up there.
Buying, selling, or just want to know how many years you have left? We look, we tell you, and we do not turn it into a pitch for a roof you do not need.
We still shingle plenty of roofs. Cracked, curled and blown off shingles get replaced, and the valleys and flashing get reworked while we are up there.
Old skylights leak at the flashing long before the glass ever fails. We reflash, reseal, or set a new unit and tie it in properly.
Rotted fascia and sagging soffit let water and animals in behind the roof edge. We cut the bad wood out and put new in.
We work around your hours, weekends included when that is what it takes to keep your doors open while the roof goes on.
Ice backs up at a cold eave and pushes water sideways under the roof. We clear it without gouging the panels or the shingles.
Slate and tile take patience and matching pieces. We replace broken and slipped units and rework the flashing they hide.
Where it makes sense we set low slope metal over a problem section so it finally drains instead of ponding after every rain.
Metal is what we are known for. Since 2002 the bulk of our work has been standing seam and metal panel roofs, and it is still what most Bealeton homeowners call us about. We measure on site, help you settle on a color, and set the panels straight.
We do shingle roofs too, and plenty of them. But if you have been thinking about a tin roof on your Bealeton home, that is the conversation we enjoy most — panel type, color, trim, and what it is really going to cost.
Why people around Bealeton call us back and send their neighbors our way.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
A few backed out screws or a whole roof off a church — we take both. No job is too small to get the same crew and the same care.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Beds get covered, tear off gets hauled as we go, and a magnet goes over the drive before we pull out. Your yard should look like we were never there.
Somebody comes out, measures, gets on the roof, and leaves you a written price. No charge, no obligation, and no number that expires if you do not sign today.
Straight answers to what Bealeton homeowners ask us most often.
Much less than people expect. Over solid decking with underlayment under it, a Bealeton metal roof sounds about like a shingle roof from inside the house. The loud tin roof people remember was screwed straight to open purlins over a barn with nothing underneath.
For most Bealeton homes, yes. A metal roof costs more up front than shingles, but it usually outlives two or three shingle roofs, sheds rain and snow better, and does not peel off in a hard wind. We will price metal and shingle side by side so you can compare real numbers instead of guessing.
Often, yes. Plenty of the Bealeton roofs we get called to look at need flashing reworked or a section refastened, not a whole new roof. We will tell you honestly which one you are looking at, and if it is repairable we would rather repair it.
Most Bealeton metal roof jobs land somewhere between about $12,000 and $30,000 in 2026, depending on square footage, pitch, panel type and how much tear off there is. Standing seam runs higher than exposed fastener panels. We measure before we quote, and the estimate is free.
A metal roof installed properly on a Bealeton home should give you 40 to 60 years, and standing seam often goes longer because there are no exposed fasteners. Screws and sealants on a panel roof want attention around year 20, which is a small job next to a re-roof.
Most Bealeton houses are a two to four day job. A straightforward shingle roof can be done in a day or two. A cut up metal roof takes longer because every panel, valley and trim piece is measured and fit on site rather than pulled out of a box.
Real feedback from homeowners whose roofs we have worked on.
"Called them about one leak and they found two more just getting started. Fixed all three and still charged less than I had budgeted for."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Burgundy metal roof on our brick ranch and I get compliments on it constantly. They brought the color chart out and let us take our time deciding."
Our crews cover the surrounding area, not only the city limits.